POWER KITS for the LP Series of MINIMIS luminaires (IRIS LP, THUMBTACK LP, QUANTUM LP, DOT LP).
The power supply in our power kit is UL 60950-1 compliant, which requires the transformer to have SELV-conformal circuitry and protections
SELV transformers feature a SELV circuit is a "secondary circuit which is so designed and protected that under normal and single fault conditions, its voltages do not exceed a safe value." A "secondary circuit" has no direct connection to the primary power (AC mains) and derives its power via a transformer, converter or equivalent isolation device.
SELV output is achieved through electrical isolation with double or reinforced insulation between the primary and secondary side of the transformers. Moreover, to meet SELV specifications, the voltage between any two accessible parts/conductors or between a single accessible part/conductor and earth must not exceed a safe value, which is defined as 42.4 VAC peak or 60VDC for no longer than 200 ms during normal operation. Under a single fault condition, these limits are allowed to go higher to 71VAC peak or 120VDC for no longer than 20 ms.
A CLASS II (max 5 amp) is available upon request, but max luminaire capacity is reduced to 45 luminaires.
LP POWER KIT ACCESSORIES
Click on the graphics above for the available power kits.
Crestron compatibility information.